//////////////////////////////////////////////////////////////////////
//// ////
//// 8051 cores b register ////
//// ////
//// This file is part of the 8051 cores project ////
//// http://www.opencores.org/cores/8051/ ////
//// ////
//// Description ////
//// b register for 8051 core ////
//// ////
//// To Do: ////
//// Nothing ////
//// ////
//// Author(s): ////
//// - Simon Teran, simont@opencores.org ////
//// ////
//////////////////////////////////////////////////////////////////////
//// ////
//// Copyright (C) 2000 Authors and OPENCORES.ORG ////
//// ////
//// This source file may be used and distributed without ////
//// restriction provided that this copyright statement is not ////
//// removed from the file and that any derivative work contains ////
//// the original copyright notice and the associated disclaimer. ////
//// ////
//// This source file is free software; you can redistribute it ////
//// and/or modify it under the terms of the GNU Lesser General ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any ////
//// later version. ////
//// ////
//// This source is distributed in the hope that it will be ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
//// PURPOSE. See the GNU Lesser General Public License for more ////
//// details. ////
//// ////
//// You should have received a copy of the GNU Lesser General ////
//// Public License along with this source; if not, download it ////
//// from http://www.opencores.org/lgpl.shtml ////
//// ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: not supported by cvs2svn $
// Revision 1.8 2003/04/07 14:58:02 simont
// change sfr's interface.
//
// Revision 1.7 2003/01/13 14:14:40 simont
// replace some modules
//
// Revision 1.6 2002/09/30 17:33:59 simont
// prepared header
//
//
// synopsys translate_off
`include "oc8051_timescale.v"
// synopsys translate_on
`include "oc8051_defines.v"
module oc8051_b_register (clk, rst, bit_in, data_in, wr, wr_bit,
wr_addr, data_out);
input clk, rst, wr, wr_bit, bit_in;
input [7:0] wr_addr, data_in;
output [7:0] data_out;
reg [7:0] data_out;
//
//writing to b
//must check if write high and correct address
always @(posedge clk or posedge rst)
begin
if (rst)
data_out <= `OC8051_RST_B;
else if (wr) begin
if (!wr_bit) begin
if (wr_addr==`OC8051_SFR_B)
data_out <= data_in;
end else begin
if (wr_addr[7:3]==`OC8051_SFR_B_B)
data_out[wr_addr[2:0]] <= bit_in;
end
end
end
endmodule